
Potato varieties: choosing for market requirements
An article by the Agrico-M team. Agronomic information is general; technical sources are identified in the article where cited. Contact our team to suggest a correction. Contact
For Romanian commercial growers and traders, variety selection starts with use and lot specification. Write down grade, cooking or processing test and acceptance conditions before comparing prices. The negotiation and receiving sheet helps turn a general request for Brașov or Covasna potatoes into a checkable offer for the agreed season and delivery.
Which practical reference points can you use?
Compare the same accepted product: common use, agreed grade and weighing basis. Breeder data supports an initial shortlist; a lot sample establishes what can be delivered. The commercial examples use hypothetical inputs so the calculations can be checked and replaced with contract data, without presenting them as market prices or legal limits.
| Check and decision | Source / basis |
|---|---|
| Specify ware, processing or seed use; a table profile does not automatically establish good frying quality. | Agrico — Arizona |
| Agrico’s Arizona card gives 17% dry matter; request a test for the offered lot. | Agrico — Arizona |
| Agrico’s Picasso card gives 20.8% dry matter; check catalogue comparisons using equivalently collected samples. | Agrico — Picasso |
| Example negotiated grade: 45–75 mm; enter sizing method and agreed tolerance in the contract. | Hypothetical example; editorial calculation or specification. |
| Define gross weight, packaging, soil and accepted product separately; compare offers on a common net basis. | John J. Burke — Growing the Potato Crop |
| Hypothetical example: 800 lei/delivered t with 8% unrecoverable grading loss gives 800 ÷ 0.92 = 869.6 lei/accepted t before other costs. | Hypothetical example; editorial calculation or specification. |
| If receipt reveals free moisture or rot, segregate and assess the lot before mixing or shared storage. | AHDB — Seed potato storage |
| Before loading, confirm variety, lot code, packaging, delivery and non-conformance handling in writing. | John J. Burke — Growing the Potato Crop |
What use belongs in the enquiry?
“Ware potatoes” is a useful starting point, but not a full specification. A kitchen boiling whole portions may need different behaviour from one making mash. For prepacked retail, discuss the buyer’s presentation and uniformity requirements alongside pack size.
Crisping and frying processors have their own acceptance tests; suitability cannot be inferred from skin colour or tuber size. Seed potatoes represent a separate enquiry with specific identity and documentation needs. Write one sentence explaining what happens to the product after delivery. If that sentence cannot yet be completed, seek clarification before shortlisting varieties.
How do preferences become specifications?
Replace “good size” with the required range and measurement method. Specify whether variety mixtures are acceptable, how origin should be described and which defects will be assessed on receipt. “Washed” describes an operation rather than automatically proving quality or keeping ability.
Request presentation that suits your handling process and confirm what the offer includes. Include total quantity, quantity per delivery, destination and delivery period in the same enquiry. Clearly mark non-negotiable requirements. Otherwise a supplier may price a condition you assumed was implicit differently, leaving apparently similar offers impossible to compare.
What separates catalogue data from lot evidence?
A breeder sheet describes the profile of a variety. It does not establish the predominant grade in a particular lot or the condition of a specific delivery. Agrico’s catalogue distinguishes outlets including traditional markets, retail and processing, illustrating why intended use belongs at the beginning of the discussion.
For the actual lot, request its identifier, offered quantity, observed condition and relevant documents. Photographs need a lot reference and date; a variety presentation image cannot establish the condition of the offered goods. Where testing matters, agree the method, sample and timing. A result from another season or lot does not automatically answer your enquiry.
How do you check cooking or processing use?
For a kitchen, a sample cooked using the actual working method can clarify texture, appearance and portioning. Use the same method when comparing alternatives and preserve sample identity. For processing, request the processor’s specification before proposing a variety; dry matter and frying behaviour cannot be substituted with tuber size.
AHDB research on agronomy and storage considered fry colour and dry matter together, illustrating why evaluation must relate to the intended process. That does not establish universal thresholds for your contract. State who accepts the sample and whether acceptance covers that sample, the identified lot or a subsequent delivery.
How do delivery and storage connect?
Clarify an “available” response: how much, from which lot, until when and on what terms? For successive deliveries, check whether the source remains the same or can change between instalments. If goods will wait at your premises, discuss holding time and storage conditions as part of the enquiry.
A variety name does not compensate for unsuitable space or delayed intake. Agree who communicates schedule changes, who confirms unloading and how lots remain separate. In cross-border trade, also confirm document language, units and the operational contact; seemingly small details can cause practical delays.
How do you compare cost per accepted tonne?
Put offers in a table with matching columns: lot, quantity, grade, presentation, packaging, handover point, transport, timing and payment terms. Check that prices use the same unit and identify what is included. A lower price per kilogram does not automatically mean a lower cost for the product you need if further grading, different packaging or another handling step is necessary.
Do not invent loss percentages without evidence. Mark unknown costs and request clarification. If a substitute is proposed, assess it against the same specification rather than availability alone or a similar-sounding name.
What belongs in the enquiry form?
An enquiry can read: “We require potatoes for [use], meeting [grade and presentation], in [packaging], for delivery to [destination] during [period]. Total quantity is [quantity], in deliveries of [quantity]. Please identify the variety, lot, offer terms and available checks.” Fill the brackets with actual requirements; this is a worksheet, not an order or an Agrico-M offer.
Attach acceptance criteria and outstanding questions. For a crop plan, also agree the latest date by which the buyer can confirm variety and requirements before decisions become difficult to reverse.
How do you document receipt?
Before delivery, agree which documents and observations will be checked, who can accept the goods and how discrepancies are handled. On arrival, link findings to the confirmed lot and offer. Distinguish a new preference raised after unloading from a previously agreed requirement.
Keep sample records, commercial confirmation and intake evidence together. For named varieties, continue with the comparison guide; for planning production, use the crop-year stages. A sound choice is an explainable match between product, lot and buyer, with unresolved questions addressed before the next step.
For named varieties and their differences, use the dedicated comparison. If planning production for this enquiry, connect the specification to the stages of the crop year.
What questions arise in practice?
Is catalogue dry matter a lot guarantee?
Use the catalogue for screening and request a measured result for the actual lot. Record method and sample date. Crop conditions, storage and sample selection can affect the buyer’s result, so connect the offer to the material delivered.
Can I compare differently packed offers?
Convert costs to the same accepted net quantity, including packing and handling. Check whether grading and transport are included. Retain assumptions on the sheet so a service difference is not hidden inside a simple price-per-tonne comparison.
What if the sample does not match the enquiry?
Describe the deviation using the agreed indicator and attach identified samples or photographs. Seek clarification before mixing lots. Options can include regrading, another destination or rejection under the agreement, with quantity and cost effects recorded separately.
How do I avoid a paper-compliant but impractical delivery?
Test the sample through actual use: boiling, baking or the buyer’s process. Add delivery timing and storage capacity. Close negotiations when both teams share a definition of product, services and receipt.
How do you use the downloadable sheet?
Download the PDF booklet in this page’s language and use the article page identified in the link. Enter actual readings beside the references and retain the sheet with its sample or lot record. On the next visit compare the same units and record the change that supports the team’s decision.
- Write the use, grade and agreed test.
- Compare offers per accepted net tonne.
- Check the received lot and retain results with the order.
Download the PDF checklist (8/9)
Which guides support the next check?
- The potato year in Transylvania: a practical plan
- Red Lady, Bellarosa, Red Fantasy, Arizona and Picasso
- Potato larvae: identification and label-led decisions
Discuss lot requirements with the team
Sources and evidence
Documents checked on 20 October 2026; use the relevant sections in each source.